The following components are all required parts of the ATMOX EZ System:

	Control Box The EZ Control Box is the “brains” of ATMOX measuring data and controlling the system. It must be plugged into a 120V outlet. This one outlet will power all of sensors and fans.  The climate sensors plug into this control box.
	Inside Climate Sensor The inside climate sensor can be placed where needed in the crawlspace (generally in the “worst” spot). It has a holding bracket and must be connected via wire and jacks to the Control Box. This sensor measures temperature and humidity inside the crawlspace. It is included with the ATMOX controls.
	Outside Climate Sensor The outside climate sensor is the same sensor as the inside climate sensor but comes with a separate installation plate designed for outdoor usage. It also needs to be connected via wire and jacks to the Control Box. This sensor measures temperature and humidity inside the crawlspace. It is included with the ATMOX controls.
	14 gauge Low Voltage Cable The system uses 14 gauge low voltage cable, which is similar to landscape lighting cables.  The fans will connect into this cable with banana plugs.  The cable which is sold in 100 ft sections is sold separately from the control set.  It can be purchased through ATMOX or from a local hardware store.
	DC-Powered Fans The EZ system uses up to ten of the ATMOX DC-powered fans (Exhaust, Intake or Dead Space) or up to six of the ATMOX Powered Louver Fans.  It can use any combination of those fans as needed by the layout of the crawlspace.