Send us a simple sketch of your house. We can then provide you with which systems or components you will need, a quote of cost and suggested layout of components and fans.
The sketch doesn’t have to be done formally or electronically – it can be handwritten as long as it is legible.

Here is a checklist for information to include:
- Give basic main dimensions of crawlspace layout (it does not have to be too accurate).
- How many wall openings are there? Where are they located? Mark them on the sketch.
- Are the openings a standard 8 x16 inch? If not, what size are they.
- What is the square footage of the house foot print?
- What is the average height of the crawlspace? What is the height in the highest and lowest points?
- Indicate decks, porches and patios. How high is deck above the ground? Is the porch dirt filled or accessible?
- Location of entrance(s) into crawlspace.
- Where are the areas with the highest moisture or trouble spots? Indicate any standing water.
- Indicate any large HVAC ducts that dissect the crawlspace.
- Where are the outside compressors located?
- Does the HVAC condensate discharge by gravity or pump?
- In newer buildings, the chimney from a gas-fired HVAC heating section comes through the foundation wall (normally in 4” PVC pipe). If applicable, indicate where these pipes are.
- Does the crawlspace have a French drain with a sump pump?
- Indicate any dense shrubbery in close proximity of the walls.
Contact Information Needed:
Name:
Company (if applicable):
Address:
City, State and Zip:
Location of Crawlspace from layout sketch:
Same as above
Name:
Address:
City, State and Zip:
Please fill in information and check off the best way to reach you.
Daytime Telephone:
Mobile Telephone:
Fax:
Email:
You can either send us this information and your sketch via fax at 704-675-9858 or via email to info@atmoxsystems.com.
You can also mail any correspondence to:
ATMOX INC
10612-D Providence Road #229
Charlotte, NC 28277
For questions or more information, call us at 704-248-2858 or email info@atmox.com.