ATMOX Attic Ventilation System - Controlling Moisture and Heat - Component Details

The following components are part of the ATMOX ATTIC 150 System:

The ATMOX ATTIC 150 System has 150 watts of power. Determine fans needs and calculate watts used to see how much power will be needed.

Control Box
The ATTIC 150 Control Box is the “brains” of ATMOX measuring data and controlling the system. It must be plugged into a 110V outlet. This one outlet will power all of sensors and fans. The climate sensors plug into this control box. The power supply for the fans is attached to the control set. (Item Number: 06-150-100)

Inside Climate Sensor
The inside climate sensor can be placed where needed in the attic (generally just under the roof). It has a holding bracket and must be connected via wire and jacks to the Control Box. This sensor measures temperature and humidity inside the attic. It is included with the ATMOX controls.

Outside Climate Sensor
The outside climate sensor is the same sensor as the inside climate sensor but comes with a separate installation plate designed for outdoor usage. It also needs to be connected via wire and jacks to the Control Box. This sensor measures temperature and humidity outside the attic. It is included with the ATMOX controls.

14 gauge Low Voltage Cable
The system uses 14 gauge low voltage cable, which is similar to landscape lighting cable. This cable attaches directly into the ATTIC 150 power supply through banana clips provided. The fans will connect onto the low voltage cable with snap splices provided. The cable which is sold in 100 ft sections is sold separately from the control set. It can be purchased through ATMOX or from a local hardware store. It is possible to use more than 100 ft for larger attics. (Item Number: 03-200-100)

DC-Powered Fans
The ATTIC 150 system can only be used in conjunction with ATMOX Attic DC-powered fans. See full listing for best solution for your attic needs. It can use any combination of those fans as needed by the design of the attic.

ATMOX Power Booster

The Power Booster is an optional addition if the attic requires fans using more than 150 Watts of power. The Power Booster will be incorporated into the ATMOX ATTIC 150 system to receive signals on when to run fans. The power booster uses the same low voltage cable to power fans. It will require an additional standard electrical outlet to be plugged into. (Item Number: 03-800-220 for ATMOX 150W Power Booster)

	Control Box The ATTIC 150 Control Box is the “brains” of ATMOX measuring data and controlling the system. It must be plugged into a 110V outlet. This one outlet will power all of sensors and fans. The climate sensors plug into this control box. The power supply for the fans is attached to the control set. (Item Number: 06-150-100)
	Inside Climate Sensor The inside climate sensor can be placed where needed in the attic (generally just under the roof). It has a holding bracket and must be connected via wire and jacks to the Control Box. This sensor measures temperature and humidity inside the attic. It is included with the ATMOX controls.
	Outside Climate Sensor The outside climate sensor is the same sensor as the inside climate sensor but comes with a separate installation plate designed for outdoor usage. It also needs to be connected via wire and jacks to the Control Box. This sensor measures temperature and humidity outside the attic. It is included with the ATMOX controls.
	14 gauge Low Voltage Cable The system uses 14 gauge low voltage cable, which is similar to landscape lighting cable. This cable attaches directly into the ATTIC 150 power supply through banana clips provided. The fans will connect onto the low voltage cable with snap splices provided. The cable which is sold in 100 ft sections is sold separately from the control set. It can be purchased through ATMOX or from a local hardware store. It is possible to use more than 100 ft for larger attics. (Item Number: 03-200-100)
	DC-Powered Fans The ATTIC 150 system can only be used in conjunction with ATMOX Attic DC-powered fans. See full listing for best solution for your attic needs. It can use any combination of those fans as needed by the design of the attic.
	ATMOX Power Booster The Power Booster is an optional addition if the attic requires fans using more than 150 Watts of power. The Power Booster will be incorporated into the ATMOX ATTIC 150 system to receive signals on when to run fans. The power booster uses the same low voltage cable to power fans. It will require an additional standard electrical outlet to be plugged into. (Item Number: 03-800-220 for ATMOX 150W Power Booster)