The ATMOX DC-Powered Attic Fans 

• When the ATMOX DC-Powered Attic Fans are being used in conjunction with the ATMOX ATTIC 150 System, the fans will receive power through the use of a low voltage cable and use snap splices provided to attach to cable.
• Each style of fan is best used in a different application.  The goal of fan placement is to use a combination of exhaust and intake fans to balance air pressure.  When setup allows for it, intake is generally taken from the lower levels of attic and pushed out toward the top since warmer air naturally rises. 
• The exhaust fans would typically be placed under a ridgeline or in a gable.  The intake fans would typically be placed in a soffit vent opening.
• The joist mounted fans are designed for use in a dead space area or when piping is needed.  They will used to increase the crossflow of air movement in a larger attic space.
• Fans can be used in any combination and configuration. Watts used will determine power supply needed.  Any number of ATMOX Power Supplies can be added to the system to allow for the power output for fans needed.

Exhaust Double Fan 225 CFM (Plate Size 14 13/16 x 7 3/8 inches)

• These fans are designed to be fit underneath a ridge vent.
• Use one fan every 10-20 feet depending on pitch of roof.
• This triple fans is DC-powered (225 CFM) and is designed as an exhaust fan.
• Maximum Watts: 18 W

 Item Number: 01-380-225

Joist Mounted 225 CFM Pipe Fan

• This fan is designed to reach improve the cross flow of air movement or to reach difficult to access areas, often used with flex pipe.
• Fans include a joist mounted bracket and extension rod.
• The single fan is DC-powered (225 CFM).
• Maximum Watts: 18 W
  

Item Number: 01-380-200

Intake Double Fan 145 CFM (Plate Size 14 13/16 x 7 3/8 inches)

• This fan is designed to be used as an intake fan to be mounted in the soffits.  
• They can be mounted inside the attic or can be mounted from the outside and covered with a standard soffit vent cover. 
• This double fan is DC-powered (145 CFM) and is designed as intake.
• Maximum Watts: 10 W

Item Number: 01-350-030 for Intake

Exhaust Roof Fan 225 CFM Fan with Roof Cap

• This fan is designed to mount on the outside of a pitched roof.
• Fan mounts from underneath attic to externally mounted roof cap.
• The fan is DC-powered (225 CFM).
• Maximum Watts: 18 W
  

Item Number: 01-380-500

Exhaust Double Fan 450 CFM (Plate Size 19 x 10 inches)

• These fans are designed to be mounted behind a gable opening.
• The gable can be used as an exhaust point when there is no ridge vent or additional ventilation is desired.
• This double fan is DC-powered (450 CFM) and is designed as exhaust.
• Maximum Watts: 36 W

 Item Number: 01-380-410

Exhaust Roof Fan 225 CFM with Gooseneck Roof Cap

• This fan is designed to mount on the outside of a pitched roof.
• The Gooseneck Cap allows for high snowfall accumulation on roof.
• This fan is DC-powered (225 CFM).
• Maximum Watts: 18 W

Item Number: 01-380-520